EN English
Select languageChoose your preferred language
English Français Bahasa Indonesia Tiếng Việt ไทย Русский 한국어 日本語 Español العربية
EN English
Select languageChoose your preferred language
English Français Bahasa Indonesia Tiếng Việt ไทย Русский 한국어 日本語 Español العربية
Roof Panel and Wall Panel Vacuum Lifter for Site Installation – image 1
CLADDING VACUUM LIFTERS

Roof Panel and Wall Panel Vacuum Lifter for Site Installation

WOLIFT roof and wall panel vacuum lifters are designed for construction site installation of long roof panels, wall panels, sandwich panels and cladding panels, with roof type and wall type options.

Request a proposalBack to category
Roof and wall panel installation

Roof panel and wall panel vacuum lifter for construction site installation

WOLIFT roof panel and wall panel vacuum lifters are designed for lifting, positioning and installing long roof panels, wall panels, sandwich panels and cladding panels on construction sites. The WO-WDB series helps contractors reduce manual panel handling, improve installation efficiency and control panel angle during roof and facade work.
WOLIFT roof panel vacuum lifter for steel structure roof installation

Industrial roof panel installation

Designed for long roof panel lifting and positioning on steel structure buildings and industrial roofing projects.
WOLIFT wall panel vacuum lifter for sandwich wall panel installation

Sandwich wall panel installation

Helps lift and position insulated wall panels during facade, warehouse and workshop enclosure installation.
Vacuum lifter for cold storage panel installation

Cold storage panel installation

Suitable for cold room and refrigerated building panels where stable lifting and careful surface contact are required.
Cladding panel vacuum lifter for prefabricated building installation

Prefabricated building cladding

Supports installation of cladding panels and enclosure panels on prefabricated and steel frame buildings.
Selection note: This product focuses on roof and wall panel installation, not ordinary workshop plate transfer. Panel length, panel profile, surface condition, roof angle, lifting height, wind condition and crane method should be confirmed before selection.
Two product types

Choose roof panel type or wall panel type according to flipping direction

The roof panel model and wall panel model share the same installation logic, but their flipping direction and working angle are different. WOLIFT can recommend the correct type according to whether the customer mainly installs roof panels, wall panels or both.
Roof panel vacuum lifter for 0-25 degree roof installation Roof Panel TypeDesigned for roof panel installation, suitable for 0-25° roof angle and long panel positioning on roofing projects.
Wall panel vacuum lifter with 0-90 degree tilting for wall and roof panels Wall Panel TypeDesigned for wall panel installation with 0-90° tilting. It can also be used for roof panels when the project requires wider angle adjustment.
Long panel support

Extension beams and distributed suction pads for long panels

Long roof and wall panels need stable support during crane lifting. The WO-WDB series uses extension beams and multiple suction pads distributed along the panel length, helping reduce panel bending, improve balance and make positioning easier during installation.
Long panels Model options support panel lengths from 12000 mm to 26000 mm.
Extension beams Extension beam quantity can be selected according to panel length.
Distributed pads Suction pads are arranged along the panel to improve lifting stability.
Panel protection Vacuum lifting helps reduce manual dragging, bending and surface damage.
Core functions

Roof angle control and wall panel tilting for site installation

The WO-WDB series is built around construction site positioning. The key is not only lifting the panel, but also controlling panel angle and orientation during roof and wall installation.
Roof panel vacuum lifter with 0-25 degree roof panel tilting 010-25° roof panel tilting
Wall panel vacuum lifter with 0-90 degree wall panel tilting 020-90° wall panel tilting
Vacuum lifter for long roof and wall panel support 03Long panel support with extension beams
Roof and wall panel vacuum lifter with distributed suction pads 04Distributed suction pads along the panel
Optional configurations

Wireless remote, dual vacuum circuit, electric tilting and electric rotation

Different construction sites require different levels of control and safety. WOLIFT can configure the roof and wall panel vacuum lifter with wireless remote control, dual vacuum circuit, electric tilting and electric rotation according to panel size, installation height and working method.
Wireless remote Allows operators to control suction and release more conveniently from a safer position.
Dual circuit Dual vacuum circuit can improve safety for higher requirement construction projects.
Electric tilting Helps control roof or wall panel angle with less manual effort.
Electric rotation Supports panel direction adjustment during lifting and final positioning.
Roof type vs wall type

How to choose the right panel vacuum lifter

If the project mainly installs long roof panels on low-slope roofing, the roof panel type is usually the better choice. If the project needs vertical wall panel installation or both wall and roof panel handling, the wall panel type with 0-90° tilting is more flexible.
Roof only Choose roof panel type for long roof sheets and 0-25° roof installation.
Wall panels Choose wall panel type when panels need vertical positioning on facades.
Both uses Wall panel type can also handle roof panels when broader angle control is needed.
Custom length Choose lifter length and extension beams according to the actual panel length.
Operation video

Roof and Wall Panel Vacuum Lifter for Construction Installation

See how the WOLIFT roof and wall panel vacuum lifter helps operators lift, move, position, and install roof panels, wall panels, sandwich panels, metal panels, and other construction panels with less effort and better control. With stable vacuum suction and smooth operation, the system is suitable for roofing installation, wall cladding installation, steel structure construction, prefabricated building projects, and construction material handling applications.
Models

Roof panel vacuum lifter model reference

The roof panel type is designed for long roof panels and 0-25° roof installation. Model selection should consider panel length, lifter length, extension beam quantity, max load and suction pad quantity.
View roof panel model table
Roof Panel Model Lifter Length Panel Length Ext Beam Qty Max Load Max Load on Traverse Suction Pad Qty Pad Size / Load
WO-WDB-RY2650 2650 mm 12000 mm 2 300KG 800KG 8 110 × 530 / 75KG
WO-WDB-RY4450 4450 mm 14000 mm 4 300KG 500KG 8 110 × 530 / 75KG
WO-WDB-RY6250 6250 mm 16000 mm 6 300KG 300KG 8 110 × 530 / 75KG
WO-WDB-RY4450L 4450 mm 14000 mm 4 300KG 800KG 8 110 × 530 / 75KG
WO-WDB-RY6250L 6250 mm 16000 mm 6 300KG 500KG 8 110 × 530 / 75KG
WO-WDB-RY8050L 8050 mm 18000 mm 8 300KG 500KG 8 110 × 530 / 75KG
WO-WDB-RY9850L 9850 mm 20000 mm 10 300KG 500KG 8 110 × 530 / 75KG
WO-WDB-RY8050LD 8050 mm 18000 mm 8 450KG 500KG 12 110 × 530 / 75KG
WO-WDB-RY9850LD 9850 mm 20000 mm 10 450KG 500KG 12 110 × 530 / 75KG
WO-WDB-RY1525LDD 15250 mm 24000 mm 16 500KG 500KG 16 110 × 530 / 75KG
WO-WDB-RY1705LDD 17050 mm 26000 mm 18 500KG 500KG 16 110 × 530 / 75KG
Wall panel models

Wall panel vacuum lifter model reference

The wall panel type is designed for vertical wall panel installation and can also be used for roof panels. The main feature is 0-90° tilting for wider panel angle control.
View wall panel model table
Wall Panel Model Lifter Length Panel Length Ext Beam Qty Max Load Max Load on Traverse Suction Pad Qty Pad Size / Load
WO-WDB-RYT2650 2650 mm 12000 mm 2 300KG 800KG 8 110 × 530 / 75KG
WO-WDB-RYT4450 4450 mm 14000 mm 4 300KG 500KG 8 110 × 530 / 75KG
WO-WDB-RYT6250 6250 mm 16000 mm 6 300KG 300KG 8 110 × 530 / 75KG
FAQ

Questions about roof and wall panel vacuum lifters

What is the difference between roof panel and wall panel vacuum lifters?The roof panel type is mainly for roof panel installation and 0-25° roof angle positioning. The wall panel type is mainly for wall panel installation and provides 0-90° tilting. The main difference is the flipping direction and working angle.
Can the wall panel lifter also install roof panels?Yes. The wall panel type can also be used for roof panels when the project requires wider angle adjustment or both wall and roof panel installation.
What roof angle can the roof panel model handle?The roof panel type is designed for 0-25° roof panel positioning. The final selection should be confirmed according to roof slope, panel length, lifting method and site conditions.
Why choose a dual vacuum circuit?A dual vacuum circuit can improve lifting safety for construction site panel installation, especially when handling larger panels or working on higher requirement projects.
Can the lifter be customized for longer panels or special profiles?Yes. WOLIFT can adjust lifter length, extension beam quantity, suction pad layout and optional functions according to panel length, profile, surface condition and installation method.