What information is needed before quotation?

For quotation, WOLIFT normally needs load weight, dimensions, material surface, lifting orientation, working cycle, pickup and release position, site space, power or air supply, and whether a crane, trolley or special frame is required.

What materials can Pneumatic vacuum sheet metal lifter handle?

This product can be configured for glass panels and related sheet materials. Final feasibility depends on surface condition, weight, size, leakage, deformation and the required lifting path.

How should the correct model be selected?

Model selection should be based on the actual load weight, workpiece size, lifting height, stroke, operating frequency, safety requirements and site layout. WOLIFT engineers can recommend a suitable model after reviewing the application.

Is the battery-powered version suitable for sites without fixed power?

Yes. Battery-powered equipment is suitable for outdoor installation, construction sites and areas where fixed power or air supply is not convenient. Battery capacity and charging arrangement should be confirmed according to the working cycle.

What air supply is required?

Pneumatic equipment should be connected to a stable compressed air supply. The required pressure, air consumption and pipeline arrangement should be confirmed according to the final configuration.

What safety features are available?

WOLIFT vacuum lifting equipment can be supplied with CE compliance and vacuum holding function. The detailed safety factor, alarm, vacuum circuit and control design should be confirmed according to product type and application risk.

VACUUM SHEET METAL LIFTERS

Pneumatic vacuum sheet metal lifter

Name: Pneumatic vacuum sheet metal lifter operation video
Uploaded: 2026-09-01
Description: WOLIFT pneumatic vacuum sheet metal lifter is an air powered 500KG plate handling solution with cylinder lifting, designed for frequent sheet metal loading, unloading and laser cutting plate feeding.

WOLIFT pneumatic vacuum sheet metal lifter is an air powered 500KG plate handling solution with cylinder lifting, designed for frequent sheet metal loading, unloading and laser cutting plate feeding.

Request a proposal Back to category

Sheet metal handling

Pneumatic vacuum sheet metal lifter for fast plate loading

WOLIFT pneumatic vacuum sheet metal lifters are designed for short-distance, intensive and frequent metal sheet handling. The WO-BC500(AIR) series uses compressed air power and cylinder lifting to help operators load, unload and transfer flat metal plates quickly around laser cutting machines and fabrication workstations.

Sheet metal

Suitable for flat sheet metal handling in fabrication workshops, cutting areas and plate transfer stations.

Steel plate

Designed for stable suction and quick lifting of steel plates during repeated loading and unloading tasks.

Stainless steel sheet

Helps reduce manual lifting when handling stainless steel sheets before or after cutting and processing.

Aluminum sheet

Can be used for aluminum sheets and other flat non-porous metal plates after surface and weight confirmation.

Selection note: This pneumatic sheet metal lifter is mainly for flat, non-porous metal plates. Plate weight, size, surface condition, air pressure and handling cycle should be confirmed before final selection.

Air powered lifting

Compressed air drive with efficient cylinder lifting

The WO-BC500(AIR) series is especially suitable for high-frequency plate feeding. Instead of using an electric hoist for vertical movement, the pneumatic cylinder provides fast lifting action, making the handling process simple, convenient and efficient for operators.

500 kg Safe load capacity for common metal sheet and steel plate handling requirements.

0.6-0.8 MPa Compressed air power system for factories with existing air supply.

Cylinder lift Fast vertical lifting by pneumatic cylinder for frequent loading cycles.

Manual control Simple manual operation for suction, release and plate positioning.

Applications

Built for laser cutting and metal fabrication workshops

This air powered vacuum sheet lifter is designed for repeated metal plate movement near cutting machines, storage racks, worktables and fabrication stations.

Pneumatic vacuum sheet metal lifter for laser cutting plate feeding

01Laser cutting plate feeding

Vacuum sheet metal lifter for loading and unloading metal sheets

02Sheet metal loading and unloading

Air powered vacuum lifter for metal fabrication workshop

03Metal fabrication workshop handling

Pneumatic vacuum lifter for steel plate workstation transfer

04Steel plate transfer between workstations

Laser cutting workflow

Why pneumatic lifting works well for plate feeding

For laser cutting plate feeding, operators often need fast repeated vertical movement beside the machine. A pneumatic vacuum lifter keeps the process clean and efficient when compressed air is already available in the workshop.

No charging Continuous use without battery charging when factory air supply is available.

No chain hoist Cylinder lifting replaces electric hoist movement for faster short-stroke handling.

Fast cycles Suitable for intensive and frequent metal sheet loading operations.

Stable suction Six suction cups help distribute lifting force across flat metal sheets.

Operation video

Pneumatic Vacuum Sheet Metal Lifter for Metal Sheet Handling

See how the WOLIFT pneumatic vacuum sheet metal lifter helps operators lift, move, position, load, and unload metal sheets, steel plates, aluminum sheets, and other flat metal materials with less effort and better control. Powered by compressed air and stable vacuum suction, the system is suitable for sheet metal fabrication, laser cutting machine loading, CNC processing, warehouse transfer, plate stacking, and production line handling applications.

Model

Pneumatic vacuum sheet metal lifter model reference

The WO-BC500(AIR) model is designed for compressed-air powered sheet metal handling with manual control and cylinder lifting. Final configuration can be adjusted according to plate size, weight and workstation layout.

View model table

Model	WO-BC500(AIR)
Loading	500KG
Size	2000 × 800 × 720 mm
Sucker Size	Φ230 mm
Sucker Number	6
Power System	Compressed air, 0.6-0.8 MPa
Control Mode	Manual

FAQ

Questions about pneumatic sheet metal vacuum lifters

What air pressure is required for the pneumatic sheet metal lifter?

The standard power system is compressed air at 0.6-0.8 MPa. Stable factory air supply is important for reliable suction and lifting performance.

Can it lift stainless steel and aluminum sheets?

Yes, it can handle flat non-porous metal sheets such as steel plate, stainless steel sheet and aluminum sheet. The surface condition, thickness, size and weight should be checked before selection.

Is this lifter suitable for laser cutting machine loading?

Yes. The WO-BC500(AIR) series is particularly suitable for short-distance, intensive and frequent laser cutting plate feeding and unloading tasks.

Why use cylinder lifting instead of an electric hoist?

Pneumatic cylinder lifting is fast and efficient for repeated short-stroke vertical movement, which is common in sheet metal loading and unloading workflows.

Can the suction cup layout be customized?

Yes. WOLIFT can adjust the suction cup layout according to metal sheet size, weight, surface condition and the customer's workstation requirements.

Pneumatic vacuum sheet metal lifter